Milo 3.0 Motor (With Independent Leg Adjustment) Electric Massage And Facial Bed, Table
Description
The Milo Electric Massage and Facial Bed (with 3 motors) is perfect for luxury resorts or the most high-end day spas and medi-spas. The Milo is in a class of its own, featuring a sophisticated appeal with plush comfort, strength, and reliability. The exclusive, modern lift design imparts an elegance that will turn an otherwise ordinary treatment room into a luxurious haven that will set your spa apart.
★★ Awarded as the Best Spa Table by Dermascope 2023 Aestheticians' Choice Award ★★
Movements
- Electric height adjustment
- Electric backrest Adjustment
- Electric Leg Rest Adjustment
- Manual removable face cradle
- Manual removable arm rests
* Note: Electric height/back rest/leg rest adjust independently of each other.
Dimensions/Specifications
- Length without face cradle attached: 74.8”
- Length with face cradle attached: 88”
- Width without arm rests: 27.5”
- Width with arm rests: 37.8”
- Heights: 26.6” - 33.7”
- Dimension of base: 46.8”L x 24.4”W
- Backrest angle: 0° flat to 75° incline
- Weight: 222 lbs
- Flat position capacity: 500 lbs
- Incline position capacity: 330 lbs
- Cushion thickness: 5.7”
- Colors available: Beige, White & Dark Brown: base is Dark Brown Wood
- Fully electric top is outfitted with vinyl and Milo proprietary “skin touch” padding
- 50-60 Hz
- 200 W
- Voltage: 100-120 V
- Power: 2 amp
* All height measurements are from ground to top of cushion
* All measurements have a 0.25” to 0.75” tolerance
Shipping Dimensions:
- Quantity: 1
- Package A: 77” x 29” x 32” (L x W x H)
- Package A weight: 210 lbs
Warranty Information:
1-year warranty
Disclaimer
When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.
To ensure stability
- Be sure bed is on a level, non-slippery surface.
- Be sure to adjust self-leveling feet.
- Always orient the bed in-line or parallel with the base for treatment purposes.
- When rotating the bed, it is recommended that there be no client on the bed at that time.
- If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
- When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
- Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
- Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
- Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.