Palermo Spa Facial Treatment Chair/Bed/Table

Movements:

• Electric backrest angle adjustment
• Electric leg rest angle adjustment
• Electric height adjustment 
• Electric seat tilt adjustment
• Manual chair rotation
• Manual removable arm rests
• Manual head rest extension
• Manual leg rest extension

Dimensions/Specifications:

• Length without leg rest or head rest attached: 59"
• Length with leg rest extension and head rest attached: 74.5"
• Length with both leg rest extension and head rest extended out: 80.5"
• Width without arm rests: 23"
• Width with arm rests: 33"
• Heights: 25" - 37"
• BASE ONLY Dimensions: 37.5" L x 22.5" W in front: 27" W in back
• Backrest angle: 0° flat to 80° inclined
• Footrest angle: 0° flat to 85° declined
• Seat tilt angle: 0° to 10°
• Rotation: 150°
• Capacity of 350 lbs
• Colors available: Black or White
• Fully electric except for rotation 
• Buttons on the chair itself control the motors
• Reset button makes the chair fully upright and at the lowest height
• Leveling feet
• Three sections
• Breather hole
• 50-60 Hz
• 200 W
• Voltage: 100-120 V
• Power: 2 amp

* All height measurements are from ground to top of cushion

* All measurements have a 0.25 to 0.75 inch tolerance

Description:

The 4-Motor Palermo Electric Medical Spa Treatment Chair/Table is an excellent chair with great structural stability and high comfort. It’s designed to optimize the workspace with its 150° manual rotation and four motors that independently control height, backrest angle, footrest angle, and seat tilt. This model also has reversible arms and an adjustable headrest. With its high-quality super-fiber PU upholstery, it’s both elegant looking and extremely easy to clean. Please watch the video to see all the features in action.

Warranty Information:

• 1-year warranty

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability:

1. Be sure bed is on a level, non-slippery surface.

2. Be sure to adjust self-leveling feet.

3. Always orient the bed in-line or parallel with the base for treatment purposes.

4. When rotating the bed, it is recommended that there be no client on the bed at that time.

5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.

6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.

7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.

8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.

9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.