Skip to content
Cart

Menu

Elmi

  • ELMI CM-7S Plus Benchtop Centrifuge With 4x50ml Rotor (6M.01)
    CE marked Meets European health, safety and environmental standards ISO 13485 Made under an ISO 13485 certified medical device quality system FDA registered Registered with the US Food and Drug Administration
    ELMI CM-7S Plus Benchtop Centrifuge With 4x50ml Rotor (6M.01)

    ELMI CM-7S Plus Benchtop Centrifuge With 4x50ml Rotor (6M.01)

    $1,582.00

  • ELMI CM-6M Benchtop Centrifuge
    CE marked Meets European health, safety and environmental standards ISO 13485 Made under an ISO 13485 certified medical device quality system FDA registered Registered with the US Food and Drug Administration
    ELMI CM-6M Benchtop Centrifuge

    ELMI CM-6M Benchtop Centrifuge

    $1,301.00

  • ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude With Large Platform
    ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude With Large Platform

    ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude With Large Platform

    $868.00

  • ELMI DOS-20L Digital Orbital Shaker 20mm Amplitude With Large Platform
    ELMI DOS-20L Digital Orbital Shaker 20mm Amplitude With Large Platform

    ELMI DOS-20L Digital Orbital Shaker 20mm Amplitude With Large Platform

    $1,149.00

  • ELMI RM-2L Intelli Mixer Large Includes Mix Rack
    ELMI RM-2L Intelli Mixer Large Includes Mix Rack

    ELMI RM-2L Intelli Mixer Large Includes Mix Rack

    $850.00

  • ELMI CM-8S Touchscreen Swing Out Centrifuge
    CE marked Meets European health, safety and environmental standards ISO 13485 Made under an ISO 13485 certified medical device quality system
    ELMI CM-8S Touchscreen Swing Out Centrifuge

    ELMI CM-8S Touchscreen Swing Out Centrifuge

    $1,883.00

ELMI makes compact laboratory equipment for clinics, med spas and small labs. This collection includes ELMI benchtop centrifuges for separating blood and other samples, orbital shakers for gentle, even agitation, and an intelligent mixer for tubes and vials.

ELMI Equipment

Benchtop Centrifuges

Benchtop centrifuges separate samples by spinning them at controlled speeds. They are used in clinics and med spas for routine blood and plasma separation. Models differ in rotor type and tube capacity.

  • Fixed-angle rotors hold tubes at a set angle for fast sedimentation.
  • Swing-out rotors let tubes swing to horizontal so particles settle at the bottom of the tube, which gives a clean separation line.

Orbital Shakers

Orbital shakers move samples in a smooth circular motion to mix and agitate. Analog and digital versions are available, with large platforms for flasks, plates and racks.

Mixers

Lab mixers rotate or rock tubes to keep samples evenly mixed, and come with racks for common tube sizes.

How to Choose

  • Application: Match the equipment to the samples and procedures you run.
  • Speed and force: For centrifuges, check the speed range (RPM and RCF) required by your protocol.
  • Capacity: Confirm the number and size of tubes, flasks or plates the rotor or platform holds.
  • Controls: Digital displays and programmable settings make results repeatable; touchscreens simplify setup.
  • Safety: Look for lid locks, imbalance detection and emergency stop.
  • Space and power: Measure the bench and confirm voltage requirements.

Care and Safety

  • Always balance centrifuge tubes, close the lid before starting and never open it while the rotor is spinning.
  • Keep equipment on a level, stable surface.
  • Remove and clean rotors and platforms regularly and inspect them for wear or corrosion.
  • Stop immediately if you notice unusual noise or vibration, check the load balance and rotor fit, and contact technical support if it continues.
  • Check speed and safety features periodically and use manufacturer-approved parts and cleaners.

Not sure which ELMI centrifuge, shaker or mixer suits your protocols? Contact us and our team will help you choose.

Spa & Equipment offers financing, Pro Membership benefits and warranty coverage on professional equipment.

Frequently asked questions

Order

Do you ship outside of the US?

Currently we don’t ship outside of the US & Canada, but some customers have successfully used freight forwarding services for deliveries outside the U.S. Essentially, this means you can arrange for a foreign shipping company to take over the delivery once your order leaves U.S. territory.

As this process is managed by a third-party service and falls outside our direct shipping operations, we recommend reaching out to our team directly for more specific guidance. Please feel free to send an email to info@skinact.com, and they will be glad to assist you with more details.

How long will it take to get my orders?

Typically orders processed here will take 5-7 business days to arrive if the product is in stock. Due to ongoing conversations with foreign suppliers, some products may experience delays in shipping.

Delivery details will be provided in your confirmation email.

Any question?

You can contact us through our contact page! We will be happy to assist you.

Payments

What payments do you accept?

We accept most major credit and debit card providers, wire transfer is permitted when ordering with help from a sales rep, and we also offer financing options.

How can I finance my purchase?

At SkinAct we offer Buy Now, Pay Later and long term financing options through Klarna, Shop, and PayPal Pay Later!

Cart 0 items

Your cart is empty

Continue shopping

    Compare products