Skip to content
Cart

Menu

Centrifuges

  • ELMI CM-7S Plus Benchtop Centrifuge With 4x50ml Rotor (6M.01)
    CE marked Meets European health, safety and environmental standards ISO 13485 Made under an ISO 13485 certified medical device quality system FDA registered Registered with the US Food and Drug Administration
    ELMI CM-7S Plus Benchtop Centrifuge With 4x50ml Rotor (6M.01)

    ELMI CM-7S Plus Benchtop Centrifuge With 4x50ml Rotor (6M.01)

    $1,582.00

  • ELMI CM-6M Benchtop Centrifuge
    CE marked Meets European health, safety and environmental standards ISO 13485 Made under an ISO 13485 certified medical device quality system FDA registered Registered with the US Food and Drug Administration
    ELMI CM-6M Benchtop Centrifuge

    ELMI CM-6M Benchtop Centrifuge

    $1,301.00

  • ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude With Large Platform
    ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude With Large Platform

    ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude With Large Platform

    $868.00

  • ELMI DOS-20L Digital Orbital Shaker 20mm Amplitude With Large Platform
    ELMI DOS-20L Digital Orbital Shaker 20mm Amplitude With Large Platform

    ELMI DOS-20L Digital Orbital Shaker 20mm Amplitude With Large Platform

    $1,149.00

  • ELMI RM-2L Intelli Mixer Large Includes Mix Rack
    ELMI RM-2L Intelli Mixer Large Includes Mix Rack

    ELMI RM-2L Intelli Mixer Large Includes Mix Rack

    $850.00

  • ELMI CM-8S Touchscreen Swing Out Centrifuge
    CE marked Meets European health, safety and environmental standards ISO 13485 Made under an ISO 13485 certified medical device quality system
    ELMI CM-8S Touchscreen Swing Out Centrifuge

    ELMI CM-8S Touchscreen Swing Out Centrifuge

    $1,883.00

Centrifuges separate the components of a sample by density, spinning tubes at controlled speed until the heavier parts settle. This collection features ELMI benchtop centrifuges, along with orbital shakers and a mixer, for med spas, clinics and labs that prepare samples on site.

What's in the collection

  • Benchtop centrifuges: compact units for a counter or lab bench, with a choice of rotors and tube capacities.
  • Swing-out centrifuges: tubes swing out to horizontal during the spin, so the separated layer settles flat at the bottom of the tube.
  • Orbital shakers: platforms that move in a smooth circular motion to mix samples or culture flasks, in analog and digital versions.
  • Mixers: rotating mixers with racks for gentle, continuous mixing of tubes.

How to choose

  • Rotor type. Fixed-angle rotors hold tubes at a set angle and suit most routine separations. Swing-out rotors give a level separation that is easier to draw from.
  • Speed and force. Check the maximum speed and relative centrifugal force against the protocol you follow.
  • Capacity. Match the number and size of tube positions to your usual batch.
  • Controls. Digital and touchscreen controls let you save programs and repeat settings exactly.
  • Safety features. Look for an automatic lid lock, imbalance detection and overspeed protection.
  • Noise and footprint. Benchtop units fit a treatment room or small lab; consider noise if the space is shared.
  • Shakers and mixers. Choose by platform size, motion type and whether you need precise digital speed control.

Safe use

  • Always balance the rotor: load tubes in opposite positions, matched by weight, not just volume.
  • Never exceed the rotor's capacity or rated speed, and never open the lid while the rotor is turning.
  • Wear gloves and eye protection, and follow your protocol for spin time and speed.

Care and maintenance

  • Clean spills from the rotor chamber, lid and exterior promptly with a cleaner suitable for the materials.
  • Inspect the rotor, buckets and seals regularly for cracks or wear, and replace damaged parts before use.
  • Store the unit in a clean, dry place, and have it checked and calibrated periodically by a qualified technician.

Not sure which rotor type or capacity matches your protocol? Contact us and our team will help you compare models.

Spa & Equipment offers financing, Pro Membership benefits and warranty coverage on professional lab equipment.

Frequently asked questions

What is the most common mistake when using a centrifuge?

An unbalanced load. It makes the rotor wobble and can damage the machine.

How long should a centrifuge last?

With regular cleaning, careful loading and periodic servicing, a benchtop centrifuge typically gives many years of service.

Cart 0 items

Your cart is empty

Continue shopping

    Compare products