Palma Electric Medical Spa Treatment Table (Facial Chair/Bed)

Movements:

• Electric backrest angle adjustment
• Electric leg rest angle adjustment
• Electric height adjustment 
• Electric seat tilt adjustment
• Manual chair rotation
• Manual removable arm rests
• Manual head rest extension
• Manual leg rest extension

Dimensions/Specifications:

• Length without leg rest or head rest attached: 57.5"
• Length with leg rest extension and head rest attached: 74"
• Length with both leg rest extension and head rest extended out: 80.5"
• Width without arm rests: 24"
• Width with arm rests: 32"
• Heights: 25" - 37"
• Base Only Dimensions: 39" L x 24" W in front: 28.5" W in back
• Backrest angle: 0° flat to 90° inclined
• Leg rest angle: 0° flat to 85° declined
• Seat tilt angle: 0° to 10°
• Rotation: 150° (75° to the left, 75° to the right)
• Capacity of 350 lbs
• Colors available: Black, White, or Grey
• Fully electric except for rotation 
• Buttons on the chair itself control the motors
• Motor controls on the base control the motors
• Reset button makes the chair fully upright and at the lowest height
• Lock all motors with the lock button: Press and hold the lock button to lock and unlock
• Leveling feet
• Three sections
• Breather hole
• 50-60 Hz
• 200 W
• Voltage: 100-120 V
• Power: 2 amp

* All height measurements are from ground to top of cushion

* All measurements have a 0.25 to 0.75 inch tolerance

Palma Datasheet

Description:

The 4-Motor Palma Electric Medical Spa Treatment Chair/Table is an exclusive chair providing high comfort and great stability. It works well in all kinds of environments from spas to doctor’s offices. Specially designed to optimize your workspace, this bed has four motors that control seat height and seat angle, backrest angle, and footrest angle. Additionally, it can be rotated 75° to each side. This model also has reversible arms and an adjustable headrest. The high-quality super-fiber PU upholstery is extremely easy to clean.

Warranty Information:

• 1-year warranty

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability:

1. Be sure bed is on a level, non-slippery surface.

2. Be sure to adjust self-leveling feet.

3. Always orient the bed in-line or parallel with the base for treatment purposes.

4. When rotating the bed, it is recommended that there be no client on the bed at that time.

5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.

6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.

7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.

8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.

9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.