Marco Electric Medical Spa Treatment Table (Facial Chair/Bed)
Description
The Marco Electric Medical Spa Treatment Chair/Table is a unique chair that offers exceptional comfort and stability. It is suitable for various settings, including spas and doctor's offices. This bed is specially designed to maximize your workspace and features four motors that control the seat height and angle, backrest angle, and footrest angle. Additionally, it comes with reversible arms and an adjustable headrest.
The high-quality super-fiber PU upholstery is not only comfortable but also easy to clean. With its full metal base, this chair/table is incredibly durable and built to withstand heavy-duty use.
Movements
- Electric backrest angle adjustment
- Electric leg rest angle adjustment
- Electric height adjustment
- Electric seat tilt adjustment
- Manual chair rotation adjustment
- Manual removable arm rests
- Manual head rest extension
- Manual leg rest extension
Dimensions/Specifications
- Length without footrest and headrest attached: 57"
- Length with leg rest extension and head rest attached: 73"
- Length with both leg rest and head rest extended out: 82"
- Width without arm rests: 25"
- Width with arm rests: 34"
- Height 25.5" - 35"
- BASE ONLY Dimensions: 39.5" L x 21.5" W
- Backrest angle: 0° to 80°
- Leg rest angle: 0° to 85°
- Seat angle: 0° to 20°
- Rotation: 90° (0° to 45° each side)
- Maximum capacity: 450 lbs.
- Colors available: Black, White, or Grey
- Reset button makes the chair fully upright and at the lowest height
- Lock button locks chair position so it will not move until unlocked (push and hold to lock and unlock)
- Foot controls on base
- Leveling feet
- Three sections
- Breather hole
- 50-60 Hz
- 200 W
- Voltage: 100-120 V
- Power: 2 amp
- Table Weight: 260 lbs.
* All height measurements are from ground to top of cushion
* All measurements have a 0.25 to 0.75 inch tolerance
Warranty Information:
1-year warranty
Disclaimer
When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.
To ensure stability
- Be sure bed is on a level, non-slippery surface.
- Be sure to adjust self-leveling feet.
- Always orient the bed in-line or parallel with the base for treatment purposes.
- When rotating the bed, it is recommended that there be no client on the bed at that time.
- If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
- When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
- Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
- Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
- Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.
If you are looking to use flat position we would highly recommend to go with more of a procedure table that has 4 leg base that can support weight from either the back or the foot rest if someone seats on those area.
Please contact our customer service for better assistance.
https://www.spaandequipment.com/Disposable-Perforated-Non-Woven-Table-Cover-23inches-wide.html
See all 7 questions for this product
Was the above review useful to you? 