Malibu Electric Medical Spa Treatment Table (Facial Chair/Bed)
Description
The 4-motor Malibu Electric Medical Spa Treatment Chair/Table is an exclusive chair providing high comfort and great stability. It works well in all kinds of environments from spas to doctor’s offices. Specially designed to optimize your workspace, this bed has four motors that control seat height and seat angle, backrest angle, and footrest angle. Additionally, it can be manually rotated 240°. This model also has reversible arms and an adjustable headrest. The high-quality super-fiber PU upholstery is extremely easy to clean.
Movements
- Electric backrest angle adjustment
- Electric leg rest angle adjustmen
- Electric height adjustment
- Electric seat tilt adjustment
- Manual chair rotation
- Manual removable arm rests
- Manual head rest extension
- Manual leg rest extension
Dimensions/Specifications
- Length with leg rest extension and head rest attached: 73"
- Length with both leg rest extension and head rest extended out: 83"
- Width without arm rests: 23"
- Width with arm rests: 33"
- Heights: 25" - 37"
- BASE ONLY Dimensions: 40" L x 31" W
- Backrest angle: 0° to 80° inclin
- Leg rest angle: 0° to 85° declin
- Seat tilt angle: 0° to 10°
- Rotation: 0° to 240°
- Capacity of 350 lbs
- Colors available: Black, White Camel Orange, Gray, Wine, Papaya, and Light Sapphire
- Fully electric except for rotation
- Buttons on back of chair itself control the motors
- Reset button makes the chair fully upright and at the lowest height
- Three sections
- Breather hole
- 50-60 Hz
- 200 W
- Voltage: 100-120 V
- Power: 2 amp
* FREE Hand remote control *
* All height measurements are from ground to top of cushion
* All measurements have a 0.25 to 0.75 inch tolerance
Warranty Information
1-year warranty
Disclaimer
When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.
To ensure stability
- Be sure bed is on a level, non-slippery surface.
- Be sure to adjust self-leveling feet.
- Always orient the bed in-line or parallel with the base for treatment purposes.
- When rotating the bed, it is recommended that there be no client on the bed at that time.
- If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
- When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
- Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
- Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
- Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.
See all 19 questions for this product
Was the above review useful to you? 