Clean+Easy Waxing Spa Full Service Kit

Clean+Easy Waxing Spa Full Service Kit

Features

• The Waxing Spa Full Service Kit is a fully comprehensive kit that contains everything needed to provide roll-on waxing services with the waxing spa warmer, wax cartridges, pre and post treatments, roller heads and waxing strips.
• This kit is perfect for the professional esthetician.
• Waxing Spa Warmer: Accomodates 3 large, 1 medium and 2 small waxes.
• The compartment at the back of the unit allows two extra applicators to heat up to 110°F (43°c), allowing a quicker heat up time when placed into the heater unit.
• Five-sided heater plates allow for even heating.
• Cleanliness and economy are increased by the curved heater plates over the top of the roller head so that the door may be left open during treatments.
• Slim design takes up very little counter space Roller Heads
• Innovative roller heads face the heater plate and contain a metal core which maintains the heat which extends waxing time.
• Thermo Sleeve: Accomodates the large applicator to retain heat longer.
• The combination of the heated roller heads and the thermo sleeve allows for longer wax periods without returning the applicator to the machine.

Kit Includes

• 1 Waxing Spa Warmer
• 3 Pack of Each: Large, Medium and Small Original Wax Refill
• 3 Pack of Each: Large, Medium and Small Sensitive Wax Refill
• 3 Pack of Large (Leg) Roller Heads
• 1 Medium (Bikini) Roller Head
• 1 Small (Face) Roller Head
• 1 Fine (Face) Roller Head
• 50 Each: Large, Medium and Small Waxing Strips
• 1, 16 oz Cleanse Pre-Wax Cleanser
• 1, 16 oz Remove Post-Wax Remover
• 1, 16 oz Soothe Aloe Vera Gel
• 1, 16 oz Restore Shea Butter Lotion
• Educational DVD - Instruction Booklet

How To Use

• Insert plug of waxer into receptacle.
• Raise front door on waxer to allow applicators to be inserted.
• Remove caps from wax applicators and place rollers on, turning roller heads until they stop. Do not overturn the rollers.
• Insert wax applicators into the waxer with the roller facing the heat plate. This allows the roller to remain warm and allows for easier and cleaner application.
• Place cloth strips into the pockets located on the back of the unit.
• Lower the waxer door. This permits faster heating. Note: Two additional large wax bottles may be inserted into the pocket on the rear of the waxer. This will keep the wax warm and will heat up faster when placed into the unit.
• Turn the unit on by moving the lighted toggle switch, located on the left side to the “on” position. Set the variable thermostat located on the left side to the highest position (full clockwise). Allow 30 minutes for the wax bottles to come to a working temperature. After the wax heats up to a working temperature turn the control knob to the center position. Please note that the optimum comfortable temperature setting for the wax can be adjusted by the salon beautician to compensate for room temperature, voltage differences or for personal preferences.
• Remove large wax bottle from the waxer and insert into the thermo sleeve. This holder will keep the wax at a hotter temperature for an extended period and allow for faster application.
• Roll the wax onto the customer in a strip. Place the holder down and apply the cloth strip onto the waxed surface, quickly pulling the cloth parallel to the skin in the opposite direction of hair growth. Continue waxing application until completed.
• Remove the wax bottle from the thermo sleeve and place the bottle back into the waxer with the roller facing the heating plate. This allows the residual film of wax on the roller to flow back into the bottle without having to clean the roller.
• The door on the waxer may be left in the up position to allow faster access to the wax bottles.
• For facial and body wax (which may be used less frequently) store outside of the heater until ready to use. Repeated heating of wax may cause it to thicken. Between customers, the thermostat should be turned to the lowest setting (stand-by) overnight, the heater should be either shut off or left on stand-by.

Waxing Steps

• Clean skin with clean+easy® Cleanse Pre-Wax Cleanser to remove all traces of oils, dead skin cells, perspiration and bacteria.
• Apply wax very lightly (ensuring a thin layer of wax) in the direction of the hair growth. A thin application of wax ensures ease of removal and economy.
• Apply waxing strip using a firmstroke in the direction of the hair growth. This ensures that both the wax and hair may be removed efficiently and no residue is left on the skin.
• The waxing strip must be removed against the hair growth and parallel to the skin in one smooth motion. This ensures that the hair will be removed effectively. Incorrect removal causes skin irritation and bruising. It causes the hair to break rather than be removed by the root, thus causing ingrown hairs.

Post Waxing Treatment

• Remove wax residue from the skin with Remove Post-Wax Remover.
• Apply with tissue using slow massaging movements. This post-wax cleanser can also be used to clean the wax roller heads and the wax warmer.
• Apply Soothe Aloe Vera Gel to skin immediately after waxing to instantly cool, soothe and reduce redness and irritation. Apply with slow massaging movements. It's also an ideal aftercare product for electrolysis, after sun, sauna, bath, shower, etc.
• Apply Restore Shea Butter Lotion to help soothe, condition and protect the skin. Apply with slow massaging movements.

Warning

• Do not leave waxing unit unattended when it is plugged in; keep it unplugged when not in use. Allow waxing unit to cool before you handle, clean, or store it.
• Keep your waxing unit away from children when it is being used. Closely supervise it use by, on or near children or individual with certain disabilities.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Do not use waxing unit if it has a damaged plug if it is not working properly, or if it has been dropped, damaged or has fallen into water.
• Do not drop or insert any object other than our pre-filled roll-on cartridges into any waxing unit opening.
• Do not use waxing unit outdoors, or when aerosol spray products are being used, or when oxygen is being administered.
• Unplug this appliance before installing or replacing prefilled roll-on wax cartridge.
• Do not apply hot wax near eyes or any heat sensitive areas, or to any skin injury, eruption or surface growth.
• Do not touch hot surfaces. Grasp the white plastic body when handling. Do not hold the plug blade when handling entire unit.
• Use waxing unit on a level surface, not on a soft surface like your bed or couch. Never go to sleep with waxing unit left on.
• Do not use an extension cord with the waxing unit.
• The physiological effects of this appliance have not been investigated by UL.

40200