Clean+Easy Petite Wax Warmer

 
(0 reviews)  

$24.95
In stock
SKU SKU20432
Weight 3.00 lbs
Clean+Easy Petite Wax Warmer

The Petite Wax Warmer is a fully functional, professional-grade wax warmer that is compact in size making it perfect for home users or for professionals with limited counter space. Accomodates 8 oz & 14 oz cans.

PREPARATION Plug the warmer into an outlet. As a safety feature, this warmer has a polarized plug (one blade is wider than the other) which will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. NOTE • clean+easy® 8 oz and 14 oz wax cans are designed to be heated in the Petite Wax Warmer; do not heat in microwave, oven or on stove. • clean+easy® Petite Wax Warmer automatically heats wax to the proper temperature. Do not use wax from other manufacturers. This may cause the unit to overheat or become damaged. • clean+easy® Petite Wax Warmer has been tested to be a safe and reliable product, but any appliance will malfunction after a period of operation. To prevent overheating, always test the wax on a small area of skin for heat sensitivity before using. DIRECTIONS FOR USE WITH SOFT WAXES 1. Remove plastic lid, place can in clean+easy® Petite Wax Warmer and turn warmer on. 2. After 30-45 minutes check to see if wax is ready. It should have a thin/creamy consistency. 3. Test the wax temperature on the underside of your wrist before application. 4. Cleanse area to be waxed with clean+easy® Cleanse Pre-Wax Cleanser, then pat skin dry with tissue. 5. Lightly dust a thin layer of clean+easy® Absorb Lavender Powder to prepare skin for waxing. 6. Holding a clean+easy® spatula at a 45° angle, apply a thin layer of wax in the direction of the hair growth. 7. Place waxing strip over wax and rub strip firmly in the direction of hair growth. 8. Hold skin taut and pull waxing strip off, parallel to the skin, in one quick motion in the opposite direction of hair growth. 9. Immediately apply firm pressure to the waxed area with the cushion of your fingers to calm the skin. NOTE: NEVER reapply wax to the same area twice. 10. Apply clean+easy® Remove Post-Wax Removerto eliminate any wax residue left behind. 11. Use clean+easy® Soothe Aloe Vera Gel to instantly cool skin on contact. 12. Apply clean+easy® Restore Shea Butter Lotion to replenish skin’s moisture. IMPORTANT: Be certain to turn the warmer off when you’re finished using it. DIRECTIONS FOR USE WITH HARD WAXES 1. Remove plastic lid, place can in clean+easy® Petite Wax Warmer and turn warmer on. 2. After 40-55 minutes check to see if wax is ready. It should have a thin/creamy consistency. 3. Test the wax temperature on the underside of your wrist before application. 4. Cleanse area to be waxed with clean+easy® Cleanse Pre-Wax Cleanser, then pat skin dry with tissue. 5. Apply a thin layer of clean+easy® Prep Epilation Oil to area being waxed. 6. Holding a clean+easy® applicator at a 45° angle, apply a thick layer of wax in the direction of the hair growth. 7. Allow wax to cool on skin until it sets and becomes pliable, approximately 30 seconds. 8. Holding skin taut, use fingertip to lift end of hardened wax. Pull wax off, parallel to the skin, in one quick motion in the opposite direction of hair growth. 9. Immediately apply firm pressure to the waxed area with the cushion of your fingers to calm the skin. NEVER reapply wax to the same area twice. 10. Apply clean+easy® Remove Post-Wax Remover to eliminate any wax residue left behind. 11. Use clean+easy Soothe® Aloe Vera Gel to instantly cool skin on contact. 12. Apply clean+easy Restore® Shea Butter Lotion to replenish skin’s moisture. IMPORTANT: Be certain to turn the warmer off when you’re finished using it.

To reduce the risk of burns, electrocution, fire or injury:



1. Do not leave waxing unit unattended when it is plugged in; keep it unplugged when not in use. Allow waxing unit to cool before you handle, clean, or store it.

2. Keep your waxing unit away from children when it is being used. Closely supervise it use by, on or near children or individual with certain disabilities.

3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

4. Do not use waxing unit if it has a damaged plug if it is not working properly, or if it has been dropped, damaged or has fallen into water.

5. Do not drop or insert any object other than our pre-filled roll-on cartridges into any waxing unit opening.

6. Do not use waxing unit outdoors, or when aerosol spray products are being used, or when oxygen is being administered.

7. Unplug this appliance before installing or replacing prefilled roll-on wax cartridge.

8. Do not apply hot wax near eyes or any heat sensitive areas, or to any skin injury, eruption or surface growth.

9. Do not touch hot surfaces. Grasp the white plastic body when handling. Do not hold the plug blade when handling entire unit.

10. Use waxing unit on a level surface, not on a soft surface like your bed or couch. Never go to sleep with waxing unit left on.

11. Do not use an extension cord with the waxing unit.

12. The physiological effects of this appliance have not been investigated by UL.
: *
: *
: *
 
Have a question? Need more information? Ask our community.
There have been no reviews