Palermo Spa Facial Treatment Chair/Bed/Table
Description
The 4-Motor Palermo Electric Medical Spa Treatment Chair/Table is an excellent chair with great structural stability and high comfort. It’s designed to optimize the workspace with its 150° manual rotation and four motors that independently control height, backrest angle, footrest angle, and seat tilt. This model also has reversible arms and an adjustable headrest. With its high-quality super-fiber PU upholstery, it’s both elegant looking and extremely easy to clean. Please watch the video to see all the features in action.
Movements
- Electric backrest angle adjustment
- Electric leg rest angle adjustment
- Electric height adjustment
- Electric seat tilt adjustment
- Manual chair rotation
- Manual removable arm rests
- Manual head rest extension
- Manual leg rest extension
Dimensions/Specifications
- Length without leg rest or head rest attached: 59"
- Length with leg rest extension and head rest attached: 74.5"
- Length with both leg rest extension and head rest extended out: 80.5"
- Width without arm rests: 23"
- Width with arm rests: 33"
- Heights: 25" - 37"
- BASE ONLY Dimensions: 37.5" L x 22.5" W in front: 27" W in back
- Backrest angle: 0° flat to 80° inclined
- Footrest angle: 0° flat to 85° declined
- Seat tilt angle: 0° to 10°
- Rotation: 150°
- Capacity of 350 lbs
- Colors available: Black or White
- Fully electric except for rotation
- Buttons on the chair itself control the motors
- Reset button makes the chair fully upright and at the lowest height
- Leveling feet
- Three sections
- Breather hole
- 50-60 Hz
- 200 W
- Voltage: 100-120 V
- Power: 2 amp
* All height measurements are from ground to top of cushion
* All measurements have a 0.25 to 0.75 inch tolerance
Warranty Information:
1-year warranty
Disclaimer
When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.
To ensure stability
- Be sure bed is on a level, non-slippery surface.
- Be sure to adjust self-leveling feet.
- Always orient the bed in-line or parallel with the base for treatment purposes.
- When rotating the bed, it is recommended that there be no client on the bed at that time.
- If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
- When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
- Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
- Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
- Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.
Business Hours:
Monday to Friday
9:00 AM to 5:00 PM (Pacific Standard Time)
1-800-418-0830 TOLL FREE
1-818-834-6640 INTERNATIONAL
See all 5 questions for this product
Was the above review useful to you? 