Bellage Electric Treatment Table (Chair) Fully Electric 4 Motor Chair
Description
The Bellage Electric Facial and Massage Treatment Table/Bed has a one-of-a-kind design with unlimited positioning combinations which will give you the ultimate freedom to perform even outpatient aesthetic procedures. It has 4 motors that control table height, backrest angle, table tilt, and leg rest angle. It has high-quality vinyl upholstery which is easy to clean and maintain. The stylish handheld remote control has a long cord. You can also tilt the headrest to make it even more comfortable for your clients. Even at the steepest angle, the bed is extremely stable. Please watch the video to see all the features in action. A one-year warranty is standard for all our equipment, including this beautiful bed.
Movements
- Electric backrest angle adjustment
- Electric leg rest angle adjustment
- Electric seat tilt adjustment
- Electric height adjustment
- Manual removeable arm rests
- Manual head rest extension
- Manual leg rest extension
Dimensions/Specifications
- Length without head rest or leg rest: 58.5"
- Length with head rest and leg rest on: 75"
- Length with head rest and leg rest extended: 88"
- Width without arm rests on: 25"
- Width with arm rests on: 35"
- Heights: 24" - 36"
- BASE ONLY Dimensions: 36" L x 23" W
- Backrest angle: 0° to 80° incline
- Bed tilt angle: 0° to 10°
- Leg rest angle: 0° to 85° decline
- Capacity of 350 lbs
- Colors available: Black, White, or Beige
- Comes with two different head rests for different procedures
- Removeable leg cushion
- Removeable arms
- Optional foot controls available
- Leveling feet on base
- Breather hole for when clients are face down
- Adjustable head rest angle
- 100-120 volts
- 50-60 hertz
- 200 watts
- Power: 2 amp
* All height measurements are from ground to top of cushion
* All measurements have a 0.25 to 0.75 inch tolerance
Warranty Information:
1-year warranty
Disclaimer
When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.
To ensure stability
- Be sure bed is on a level, non-slippery surface.
- Be sure to adjust self-leveling feet.
- Always orient the bed in-line or parallel with the base for treatment purposes.
- When rotating the bed, it is recommended that there be no client on the bed at that time.
- If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
- When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
- Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
- Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
- Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.
See all 17 questions for this product
Was the above review useful to you? 